Vancouver, B.C. – Sun Metals Corp. (“Sun Metals” or the “Company”) (TSXV: SUNM) wishes to correct its disclosure of assay results for drill hole DDH19-SD-441M reported in its news release dated October 3, 2019.

The October 3, 2019 news release incorrectly stated the drill results from hole DDH19-SD-441M as follows

The following table reflects the actual drill results from hole DDH19-SD-441M:

Corrected results in Bold

Corrected results in Bold
______________________________
(1)True widths of the reported mineralized intervals have not been determined
(2) Assumptions used in USD for the copper equivalent calculation were metal prices of $3.00/lb. Copper, $1,300/oz Gold, $18/oz Silver, $1.25/lb. Zinc and recovery is assumed to be 100% as no metallurgical test data is available. The following equation was used to calculate copper equivalence: CuEq = Copper (%) + (Gold (g/t) x 0.6319) + (Silver (g/t) x 0.0087) + (Zinc (%) x 0.4167). The following equation was used to calculate gold equivalence: AuEq = (Copper (%) x 1.5824 + Gold (g/t) + (Silver (g/t) x 0.01385) + (Zinc (%) x 0.6593).  

The technical information contained in this news release has been reviewed, verified and approved by Ian Neill P. Geo., Vice President Exploration of Sun Metals, who is a qualified person as defined by National Instrument 43-101- Standards of Disclosure for Mineral Projects.  

For more information, please contact Susie Bell, Investor Relations for Sun Metals at [email protected], (604) 697-4953, or Steve Robertson, President and CEO of Sun Metals, at [email protected], (604) 697-4942.  

On Behalf of the Board of Directors of

SUN METALS CORP.

Steve Robertson
Chief Executive Officer  

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

About Sun Metals

Sun Metals is advancing its 100% owned flagship, high-grade Stardust Project located in northcentral British Columbia, Canada. Stardust is a high-grade polymetallic Carbonate Replacement Deposit with a rich history. Sun Metals also owns the Lorraine copper-gold project (joint-ventured with Teck Resources Limited), and the OK copper-molybdenum project.

The Canyon Creek copper-gold skarn zone at Stardust was the subject of a 2018, NI 43-101 resource estimate included in a technical report titled “Stardust Project, NI 43-101 Technical Report” dated January 8, 2018. In that report, GeoSim Services Inc. provided the following estimate.

Stardust Project - Canyon Creek zone Mineral Resource Estimate(3):

(3) The cut-off grade used in the resource estimate was 1.5% copper equivalent (Cu Eq). Metal price assumptions for the Cu Eq calculation in this table were $3.00/lb Copper, $1.25/lb Zinc, $1,300/oz Gold and $18/oz Silver. Adjustment factors to account for differences in relative metallurgical recoveries of the constituents will depend upon completion of definitive metallurgical testing. The following equation was used to calculate copper equivalence: Cu Eq = Copper + (Zinc x 0.4167) + (Gold x 0.6319) + (Silver x 0.0087). A cut-off grade of 1.5% Cu Eq represents an in-situ metal value of approximately $100/tonne which is believed to represent a reasonable break-even cost for underground mining and processing. These are not mineral reserves and no work has been completed that demonstrates economic viability at the Project.]

For further information please visit Sun Metals’ website at www.Sunmetals.ca.

Cautionary Note Regarding Forward-Looking Statements

All statements in this news release, other than statements of historical fact, are “forward-looking information” with respect to Sun Metals within the meaning of applicable securities laws, including, but not limited to statements with respect to those that address mineralization at the Stardust project; the 2019 drill program and winter camp; the potential quantity and/or grade of minerals; anticipated exploration results; the growth potential of the Stardust project; planned mining methods and mineral processing; break-even cost for the Stardust project; British Columbia as a reliable jurisdiction for mining; proposed timing of exploration and development plans; potential conversion of inferred resources to measured and indicated resources; potential extension and expansion of mineral resources; and the focus of the Company in the coming months. Forward-looking information is often, but not always, identified by the use of words such as “seeks”, “anticipates”, “plans”, “continues”, “expects”, “projects”, “predicts”, “potential”, “targets”, “intends”, “believes”, “potential”, “budgets”, “schedules”, “estimates”, “forecasts” and similar expressions (including the negative of such expressions), or describes a “goal”, or variation of such words and phrases or state that certain actions, events or results “may”, “should”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management at the date the statements are made including, among others, assumptions about future prices of gold and other metal process; currency exchange rates and interest rates; favourable operating conditions; political stability; obtaining governmental approvals and financing on time; obtaining renewals of existing licences and permits and obtaining required licences and permits; labour stability; stability in market conditions; availability of equipment; accuracy of mineral resources; successful resolution of disputes and anticipated costs and expenditures. Management believes these estimates and assumptions are reasonable. In addition, many assumptions are based on factors and events that are not within the control of Sun Metals and there is no assurance they will prove to be correct.

Such forward-looking information, involves known and unknown risks, which may cause the actual results to be materially different from any future results expressed or implied by such forward-looking information, including, risks related to the speculative nature of the Company’s business; the Company’s formative stage of development; the Company’s financial position; possible variations in mineralization; conclusions of future economic evaluations; business integration risks; changes in project parameters as plans continue to be refined; current economic conditions; future prices of commodities; fluctuations in the securities market; fluctuations in currency markets; change in national and local government, legislation, taxation, controls, regulation and political or economic development; inability to obtain adequate insurance to cover risks and hazards; possible variations in grade or recovery rates; the costs and timing of the development of new deposits; failure of equipment or processes to operate as anticipated; the failure of contracted parties to perform; the timing and success of exploration activities generally; delays in permitting; possible claims against the Company; the timing of future economic studies; labour and employee disputes and other risks of the mining industry; delays in obtaining governmental approvals, financing or the completion of exploration; relationships with and claims by local communities and First Nations; and title to properties as well as those factors discussed in the Annual Information Form of the Company dated May 28, 2019 in the section entitled “Risk Factors”, under Sun Metals’ SEDAR profile at www.sedar.com.

Although Sun Metals has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Sun Metals disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise unless required by law. Accordingly, readers should not place undue reliance on forward-looking information.